DIN 3015 Series Selection Matrix

Choose the series before choosing a model or mounting code. The matrix below organizes the decision by tube layout, mechanical demand, vibration source, installation density and maintenance needs.

It is a selection aid based on the WeiQue product system. Final availability and dimensions must be confirmed for the requested tube OD and assembly.

Typical use cases

Standard series for common single-line industrial support
Heavy series for higher mechanical demand and concentrated vibration
Twin series for two repeat parallel lines with compatible ODs
Mounting method and bracket stiffness remain part of the final system

Series decision matrix

Decision factor	DIN 3015-1 Standard	DIN 3015-2 Heavy	DIN 3015-3 Twin
Tube layout	One tube per clamp point	One tube per high-demand support point	Two parallel tubes per clamp point
Typical starting use	Machine tools, general hydraulic and pneumatic lines	Pump areas, mobile or heavy equipment, larger mechanical demand	Supply/return pairs and repeated compact routing
Vibration review	General equipment vibration	Higher pulsation, mass or structural vibration	Parallel-line movement and spacing control
Space efficiency	Flexible single-line routing	Larger support envelope	Compact for two repeated lines
Escalate when	Visible movement, large spans or high load	Bracket flexibility or special dynamic load exists	ODs differ, lines need separate movement or service access is poor

This matrix does not assign a model from pressure alone. Tube OD, wall, routing, mounting stiffness, environment and project rules remain required.

Selection workflow

Define one or two tubes, measure actual OD, identify vibration and load sources, choose the preliminary series, select mounting method, then confirm material, model dimensions, hardware and certificates.

Evidence and review boundary

The matrix summarizes WeiQue catalog architecture and public DIN 3015 family information. It does not reproduce paid standard text or replace project engineering approval.